🎮 Our #1 Specialty — Gaming Console Repair

PS5 HDMI Port Repair
in Tacoma & Lakewood, WA

PS5 showing no signal or a black screen? We specialize in precision micro-soldering to replace damaged PS5 HDMI ports. Most repairs completed in 1–2 hours with a 90-day warranty.

✓ Free Diagnosis ✓ 1–2 Hour Repair ✓ 90-Day Warranty ✓ Walk-Ins Welcome ✓ No Fix, No Fee
📞 Call (253) 268-7344 💬 Text for a Quote

PS5 HDMI Symptoms We Fix

Does Your PS5 Have Any of These Problems?

The PlayStation 5 uses a delicate surface-mount HDMI port that's vulnerable to physical stress. If your PS5 is showing any of these symptoms, there's a strong chance the HDMI port is the culprit — and we can fix it.

  • TV shows "No Signal" when PS5 is powered on
  • Black or blank screen despite the PS5 appearing to turn on
  • HDMI cable feels loose or won't fully seat in the port
  • Visible bent or broken pins inside the PS5 HDMI port
  • Intermittent video signal that cuts in and out
  • PS5 port snapped or was pulled out of the board
  • Picture only works at certain angles or with pressure on cable
  • No 4K or HDR signal — only low-resolution output
Technician performing PS5 HDMI port micro-soldering repair in Tacoma WA

Data Recovery

Phone & Drive Data Recovery

Our Repair Process

How We Fix Your PS5 HDMI Port

Unlike inexperienced shops that attempt generic fixes, we use professional BGA rework stations and micro-soldering equipment — the same tools used by Sony's own engineers.

1

Free Diagnostic — No Charge, Ever

Bring in your PS5. We'll power it on, test the HDMI port, inspect the pins under magnification, and determine whether the damage is the port itself, the solder joints, or the HDMI IC chip. You'll get a clear explanation of the problem and an exact price before we touch anything.

2

Precision Port Removal

We disassemble the PS5 following proper ESD-safe procedures, then use a hot-air rework station to carefully remove the damaged HDMI port without lifting pads or damaging the surrounding board components.

3

New Port Installation & Micro-Soldering

We install an OEM-spec replacement HDMI port and solder all 19 pins plus the shield ground tabs under microscope magnification. Each solder joint is inspected before reassembly.

4

Full Signal Test (4K, HDR, VRR)

Before returning your console, we test 4K@120Hz output, HDR10, Dolby Vision (where supported), and VRR signaling. Your PS5 won't leave our shop until we've confirmed full HDMI functionality.

5

90-Day Warranty — Pick It Up

We'll text you when it's ready. Your PS5 is covered by our 90-day parts-and-labor warranty on the HDMI port repair. If the same issue returns within 90 days, we fix it for free, no questions asked.

Typical Pricing

PS5 HDMI Port Repair

$120–$190

Exact quote provided free before any work begins

  • Free diagnostic inspection
  • OEM-spec replacement HDMI port
  • Full micro-soldering repair
  • 4K/HDR signal test
  • 90-day parts & labor warranty
  • No fix, no fee guarantee
📞 Call for Exact Quote

Why We're the Right Choice

Tacoma's PS5 HDMI Repair Specialists

The PS5's HDMI port is a precision surface-mount component with 19 tiny pins soldered directly to the motherboard. Not every repair shop has the equipment or experience to fix it safely. EZ Gadget Repair has performed hundreds of PS5 HDMI repairs for customers across Tacoma, Lakewood, Puyallup, and the greater Pierce County area.

We use professional BGA rework stations — not hobby soldering irons — and inspect every solder joint under magnification. Our HDMI repair success rate exceeds 98% on consoles that arrive with HDMI port damage (not motherboard failure).

What Sets Us Apart

  • Micro-soldering specialists — not generalists attempting a repair
  • OEM-spec ports only — no cheap substitutes that fail again in weeks
  • Full 4K signal test — we verify every HDMI feature before return
  • 847 five-star Google reviews — 4.9/5 rating
  • Honest pricing — exact quote before we start

Understanding Your Repair

Everything You Need to Know About PS5 HDMI Port Repair

Why the PS5 HDMI Port Fails

Sony's PlayStation 5 uses a Type A HDMI 2.1 port that is directly soldered onto the motherboard via surface-mount technology. Unlike older console designs with through-hole connectors, this surface-mount design is vulnerable to physical stress. The most common causes of PS5 HDMI port damage include:

When the port is stressed, the solder joints can crack, the port can partially or fully detach from the board, or individual pins inside the port can bend. All of these issues result in "No Signal" or a blank screen — symptoms that can be alarming but are usually completely fixable.

Is It Always the HDMI Port?

A "No Signal" message on your TV when your PS5 is powered on is the classic symptom of a damaged HDMI port — but not the only possible cause. Before assuming it's the port, try these quick checks:

If none of these resolve the issue, the HDMI port on the PS5 is almost certainly the problem. Bring it in — our free diagnostic will confirm the exact cause.

Can I Fix the PS5 HDMI Port Myself?

We strongly advise against DIY PS5 HDMI repair. The PS5 motherboard is densely packed with components, and the HDMI port's surface-mount pads are extremely delicate. Even a small amount of excess heat from a hobbyist soldering iron can lift solder pads, damage nearby components, or crack the board's copper traces — turning a $100 repair into an unrepairable console. Professional micro-soldering equipment costing thousands of dollars is required to do the job safely. Leave it to the specialists.

How to Find Us — Serving All of Tacoma Area

EZ Gadget Repair is located at 9205 S Tacoma Way #108 in Lakewood, WA 98499 — a central location that's easily accessible from throughout Pierce County. We serve customers from Tacoma, Puyallup, University Place, Federal Way, Spanaway, Fircrest, Steilacoom, DuPont, and surrounding communities. Call (253) 268-7344 or walk in anytime during business hours: Monday–Friday 10AM–7PM, Saturday 12PM–5PM.

Common Questions

PS5 HDMI Repair FAQ

Answers to the most common questions about PS5 HDMI port repair at EZ Gadget Repair.

How much does PS5 HDMI port repair cost?
PS5 HDMI port repair at EZ Gadget Repair typically costs $120–$190. The exact price depends on the extent of damage — a port with intact solder pads is faster to repair than one where pads have been lifted. We always provide a free diagnosis and an exact quote before any work begins. No hidden fees, ever.
How long does the repair take?
Most PS5 HDMI port repairs are completed in 1–2 hours. Complex cases involving pad damage or additional motherboard work may take longer, and we'll let you know upfront if that's the case. You can wait in-store or drop off and come back when we text you.
What's covered under the 90-day warranty?
Our 90-day warranty covers the HDMI port repair — including the replacement port and all associated solder work. If the same HDMI port issue returns within 90 days (not caused by new physical damage), we'll repair it at no charge. We stand behind our work completely.
Will my game saves and data be safe?
Yes. HDMI port repair does not affect your PS5's SSD or game data. Your game saves, downloaded games, user profiles, and PlayStation Plus content are completely unaffected by the repair. We recommend backing up to the cloud as a general best practice, but HDMI repair carries zero data risk.
Do you repair PS4 and PS4 Pro HDMI ports too?
Absolutely. We repair HDMI ports on PS4, PS4 Slim, and PS4 Pro as well. Pricing and turnaround time are similar to PS5 repairs. The same micro-soldering expertise applies.

Explore More Repairs

Related Services

Console Repair

Xbox Series X/S HDMI Repair

Console Repair

Full Gaming Console Repair

Phone Repair

iPhone Screen & Battery Repair

Computer Repair

Laptop & Computer Repair

Serving

Tacoma, WA Repair Services

Serving

Puyallup, WA Repair Services

Ready to Get Your PS5 Fixed?

Free diagnosis. Exact upfront price. Done in 1–2 hours. 90-day warranty.

📞 (253) 268-7344 💬 Text Us
📞 Call Now — Free Quote